Transactions of the Society for Mining, Metallurgy, and Exploration, Inc.
Transactions home

 
  SME FaceBook SME Twitter SME LinkedIn RSS Feed

Experimental studies on controlling drilling parameters to reduce roof bolt-hole drilling nois

Mining Engineering , 2014, Vol. 66, No. 5, pp. 54-61

Luo, Yi; Collins, C.; Qiu, Biao; Li, M.M.


ABSTRACT:

 Bolting the mine roof is one of the noisiest underground mining operations. The main contribution to the noise is the drilling of the roof bolt holes, especially drilling in hard rock. Previous research shows that the specific energy consumed in drilling bolt holes is inversely proportional to the bite depth (i.e., penetration per drill revolution). Less specific energy at a reasonably high bite depth means less energy is wasted in the drilling process for producing heat, bit wear and noise. Therefore, proper control of the drilling operation to achieve a reasonably higher bite depth can reduce drilling noise from its sources as a proactive noise control approach. In order to explore the feasibility and develop the proactive technology for reducing drilling noise, drilling tests have been conducted in laboratory settings. The preliminary results show that significant reduction in noise dose can be achieved by drilling in medium hard rock with uniaxial compressive strength of about 276 bars (4,000 psi) and at a reasonably high bite depth of about 4.6 mm/rev (0.18 in./rev). This paper presents the findings from laboratory experimental studies.